-
The interface
between the sensor and the multimeter
-
-
"Kits" containing a selection of accessories to equip your instrument in one go at a lower cost.
-
MultiFIX mounting accessory
-
Leakproof, rigid site cases equipped with foam for stowing, storing and transporting your measuring instruments
-
Metal cases equipped with foam for stowing, storing and transporting your measuring instruments
-
Storage and transport accessoires
-
Used with the multi-purpose "MultiFIX" mounting system, these soft cases and bags will make your life and your measurements much easier.
-
Protected and stowed, your instruments and accessories will last longer
-
All the connection accessories required for your oscilloscope in the field
-
Essential
for connecting laboratory instruments
-
Telephone, IT and video cabling tester.
-
LAN wiring tester - Mapping, detection, location and identification of faults
-
Tester for power sockets and 10 mA / 30 mA RCDs.
-
For renovation work and quick testing of 2P+E power socket connection.
-
Detector of posts (wood/metal) and live cables.
-
400 A AC/DC RMS clamp multimeter with autoranging.
-
600 A AC RMS clamp multimeter with autoranging.
-
-
Quenching circuit locator.
-
Voltage probes for oscilloscopes
-
Handheld differential probe with wrist-strap, powered by 9V battery, 1
x 30 MHz channel, 600V CAT IV, banana plugs and crocodile clips
-
Laboratory-type differential probes with mains power supply, 2 x 30 MHz or 50 MHz channels, 600 V CAT II or CAT III, banana plugs or BNC connectors
-
Flexible current sensor Measurement, range from 100 mA to 10 kA depending on measuring instrument, Clamping diameter 100 mm
-
Power logger (W, VA, var) and energy meter –TRMS voltage and current – Installation without cutting off the electrical network – Communication: GPRS, Bluetooth, Ethernet, USB – ANDROID – 600 V CAT III
-
Power logger (W, VA, var) and energy meter –TRMS voltage and current – Analogue channels - Installation without cutting off the electrical network - 3G/GPRS, Bluetooth, Ethernet, Wifi and USB communication – 1,000 V CAT IV
-
TEMPERATURE PROBE PT1000 BT6
-
E94 is a current clamp use for measuring alternating or direct currents without any action on the installation
-
MINI 94 AC clamp /Current range from 50 mA 200 AAC
-
AmpFlex flexible current sensor for QualistarPlus CA 8436 and PEL106. IP67 connector and 100 mm clamping diameter.
-
1,000 A TRMS AC multimeter clamp
-
1,200 A TRMS AC/DC multimeter clamp
-
Flexible current sensor
IEC 61010 1000 V CAT III and 600 V CAT IV
-
LRV7 combination pH electrode
-
1 kV megohmmeter & digital multimeter – Electrical safety checks on installation – 2-colour backlit LCD screen – Immediate Pass/Fail decision: blue/red screen – Insulation at 250/500/1000 V – Voltage 0 to 700 V – Automatic power-off function
-
2--channel logger thermometer for Pt100 and Pt1000 resistance temperature sensors