Chauvin Arnoux

Accessories for SCOPIX portable oscilloscopes

Scopix IV oscilloscope ideal for work in the field or in the lab, 300 MHz, equipped with all the analytical modes: multimeter, analyser, recorder and viewing of files recorded on the oscilloscope. Practical for all measurements in total safety, it is equipped with 4 channels isolated from one another and from the earth, 600 V CAT III safety and Probix accessories.

1P, 3P and 4P earth kits of different lengths.

Accessories and resistivity add-on for 1P, 3P and 4P earth kits, resistivity.

The LX1600-PC  is a 16-channel logic analysis probe on PC for decoding a large number of data buses: UART, I2C, SPI, CAN, LIN, Modbus, etc.

400 kHz to 1 GHz PC spectrum analyzer, ideal for EMC tests and FM demodulation, suitable for SMEs and technical education.

6,000-count TRMS benchtop multimeter for a wide range of applications in electronics and electrical engineering (1,000 V Cat. III).

Communicating 60,000-count TRMS benchtop multimeter for a broad range of applications in electronics and electrical engineering (1,000 V Cat. III) .

Portable oscilloscope with 2 isolated channels, 600 V CAT III, 40 MHz bandwidth, 2 GS/s ETS, double 8,000-count multimeter with power measurements, 31-order harmonics with 40 to 450 Hz fund., colour screen, USB.

Scopix IV oscilloscope ideal for work in the field or in the lab, 60 MHz, equipped with all the analytical modes: multimeter, analyser, recorder and viewing of files recorded on the oscilloscope. Practical for all measurements in total safety, it is equipped with 2 channels isolated from one another and from the earth, 600 V CAT III safety and Probix accessories.

Scopix IV oscilloscope ideal for work in the field or in the lab, 100 MHz, equipped with all the analytical modes: multimeter, analyser, recorder and viewing of files recorded on the oscilloscope. Practical for all measurements in total safety, it is equipped with 2 channels isolated from one another and from the earth, 600 V CAT III safety and Probix accessories.

Scopix IV oscilloscope ideal for work in the field or in the lab, 100 MHz, equipped with all the analytical modes: multimeter, analyser, recorder and viewing of files recorded on the oscilloscope. Practical for all measurements in total safety, it is equipped with 4 channels isolated from one another and from the earth, 600 V CAT III safety and Probix accessories.

Infrared thermometer CA 1860 - Compact and rugged due to its 3-metre fall resistance and IP65 ingress protection

Flexible three-phase current sensors
IP67, 1,000 V CAT IV
Measurements from 0.5 A to 3 kA

TRMS leakage current multimeter clamp

Watertight portable conductivity meter, For checking the quality of water

Compact multifunction electrical installation tester – All the measurements stipulated by the NF C 15-100 & FD C 16-600 standards

1 kV Insulation and Continuity Tester

Equipped with a 160 x 120 detector and a 38°x28° wide-angle lens, the CA 1954 camera is ideal for all applications in the building, electrical maintenance and mechanical maintenance sectors.

Digital voltage and continuity tester with LCD screen
Automatic AC / DC recognition for voltage
Voltage up to 1,000 V, resistance and capacitance, diode test, automatic power-off

A comprehensive multimeter for electrical maintenance of installations and small AC and DC machines

Specially designed for industrial applications, the CA 1727 tachometer measures the rotation speed of any moving part, remotely or by contact.

Class 2 integrating sound level meter – Recording of up to 64,000 measurement points and data processing software supplied as standard – 60-hour battery life – Remote microphone with 5 m extension

Electrical installation tester compliant with the NF C 15-100 & IEC 60364-4 standards

1 kV Insulation and Continuity Tester

Compact 400 A AC TRMS clamp multimeter

The MTX 200 Series multimeters which are simple to use for day-to-day work but also offer all the crucial functions of a multimeter: current, voltage and resistance measurements.

Digital tester with MiniFlex® flexible current sensor. AC and DC voltage up to 1,000 V. Current up to 300 A via the MiniFlex® sensor included. Automatic selection of measurement type (resistance, audible continuity, capacitance or diode). No-contact detection of live conductors (phase). Large backlit display. Removable test probes.

Clamps for AC leakage current from 500 µA to 400 A

For measuring alternating currents

This rugged, intuitive digital pH-meter closely matches the requirements in the agri-food industry, education and research.

600 A TRMS AC multimeter clamp

Communicating 50-100 V Telecom Insulation and Continuity Tester

Low-voltage two-pole voltage absence testers

Expert multifunction electrical installation tester compliant with the NF C 15-100, FDC 16-600 & EN 61557 standards.

This versatile multimeter is ideal for instrumentation or command signals, as well as those on three-phase networks up to 1000 V