Chauvin Arnoux

Digital earth and resistivity tester up to 2,000 Ω in site case

Loop resistance and inductance measurements, leakage current measurements  – clamping diameter 35 mm - programmable alarms - display of earth voltage – storage of measurements - communication

Loop resistance and inductance measurements, leakage current measurements  – clamping diameter 35 mm - programmable alarms - display of earth voltage – storage of measurements

200 A digital micro-ohmmeter in a rugged, waterproof on-site casing. Programmable test current from 20 A to 200 A. Resistance from 0.1 μΩ to 1 Ω. Storage of up to 8,000 measurement results. DataView software for data processing.

Earth tester offering selective earth, soil resistivity, earth coupling, ground potential, continuity, resistance and pylon earth measurements (with the C.A 6474)

When coupled with the C.A 6472 tester, the C.A 6474 adapter can be used to check, measure and analyse the earthing of pylons (selective measurement with Ampflex flexible current sensors).

Logger thermo-hygrometer with double backlit display and dew point measurement

Manumesure proposes maintenance solutions for electrodes. In order to maintain the life span and accuracy of pH and redox electrodes, they must be cleaned and stored with suitable solutions.

Pince multimètre 400 A AC.

Compact 4,000-count digital multimeter.

2000A TRMS AC+DC multimeter clamp

2,000 A TRMS AC/DC multimeter clamp

1,200 A TRMS AC multimeter clamp

1,200 A TRMS AC/DC multimeter clamp

10 A micro-ohmmeter - Measurement from 1 µΩ to 2,500 Ω - Max. resolution 0.1 µΩ - Automatic discharge after test

10 A micro-ohmmeter - Wide measurement range from 5 μΩ to 400 Ω

This compact, comprehensive digital multimeter is equipped with all the functions required by electricians for maintenance of residential and tertiary equipment and installations

Single-phase flexible current sensors
IP67, 1000 V CAT IV
Measurements from 80 mA to 3 kA

Simple laboratory power supply, 30 V / 2.5 A, rugged, lightweight and economical

2x 30 V / 2.5A, rugged; lightweight and economical laboratory power supply

Triple laboratory power supply: 2 x 30 V / 2.5 A + 2.7 - 5.5 V / 5 A, rugged, lightweight and economical

Class C logger luxmeter with spectral error compensation for LED and fluorescent sources

Logger with digital display (CO2, Temperature, Humidity) for measuring Indoor Air Quality.

Temperature calibrator for thermocouples (J, K, T, E, R, S, B, N)

Temperature calibration of Pt10, Pt50, Pt100, Pt200, Pt500, Pt1000, Pt1000 (JIS) resistive probes

V/mA  process calibrator

1-channel logger thermometer for K, J, T, N, E, R or S thermocouples

2--channel logger thermometer for K, J, T, N, E, R or S thermocouples

E94 is a current clamp use for measuring alternating or direct currents without any action on the installation

2--channel logger thermometer for Pt100 and Pt1000 resistance temperature sensors

C.A 1875, the thermographic training bench specially designed for education.

LF teslameter / gaussmeter - Magnetic field measurement from 30 to 300 Hz

Double test probes and Kelvin clamps for measurements with micro-ohmmeters.

1,000 A TRMS AC multimeter clamp

1 kV megohmmeter & digital multimeter – Electrical safety checks on installation – 2-colour backlit LCD screen – Immediate Pass/Fail decision: blue/red screen – Insulation at 250/500/1000 V – Voltage 0 to 700 V – Automatic power-off function

IP67 three-phase power analyser