Search results for 'c a'

IP67 three-phase power analyser

1 kV megohmmeter & digital multimeter – Electrical safety checks on installation – 2-colour backlit LCD screen – Immediate Pass/Fail decision: blue/red screen – Insulation at 250/500/1000 V – Voltage 0 to 700 V – Automatic power-off function

1 kV Insulation and Continuity Tester

1 kV Insulation and Continuity Tester

1 kV Insulation and Continuity Tester

Low-voltage two-pole voltage absence testers

Low-voltage two-pole voltage absence testers

No-contact thermometer for measurements from - 50 °C to + 1,000 °C

50/1 distance/spot ratio

No-contact thermometer for measurements from - 50 °C to + 1,000 °C

30/1 distance/spot ratio

Digital voltage and continuity tester with LCD screen
AC and DC voltage testing (7 thresholds) with automatic AC or DC detection, audible continuity and single-pole phase test.

Continuity tester for measuring the resistance of the protective earth conductors and earth bonds – an ohmmeter dedicated to electrical safety

1-channel logger thermometer for K, J, T, N, E, R or S thermocouples

The pH pen specially for the agri-food sector!

Rotating-vane logger thermo-anemometer (Ø 8 mm) with double backlit display and flow rate measurement

Bluetooth logger micromanometer- Differential air pressure, air speed and air flow rate – Modes: MAP, Min, Max, Average & Hold –USB / Bluetooth communication –Data Logger Transfer software –ANDROID app

When coupled with the C.A 6472 tester, the C.A 6474 adapter can be used to check, measure and analyse the earthing of pylons (selective measurement with Ampflex flexible current sensors).

Logger with digital display (CO2, Temperature, Humidity) for measuring Indoor Air Quality.

2--channel logger thermometer for K, J, T, N, E, R or S thermocouples

Digital earth and resistivity tester up to 2,000Ω in site case with built-in battery

IP2X for greater safety

IP65 watertight pH/temperature tester. Pocket format. Simultaneous display of pH and temperature values. Automatic calibration.

Double test probes and Kelvin clamps for measurements with micro-ohmmeters.

2--channel logger thermometer for Pt100 and Pt1000 resistance temperature sensors

Digital earth and resistivity tester up to 2,000 Ω in site case

Equipped with a 160 x 120 detector and a 38°x28° wide-angle lens, the CA 1954 camera is ideal for all applications in the building, electrical maintenance and mechanical maintenance sectors.

This compact digital multimeter meets the needs of any self-employed electrician.

Earth tester offering selective earth, soil resistivity, earth coupling, ground potential, continuity, resistance and pylon earth measurements (with the C.A 6474)

Colour graphical recorder-multimeter

Colour graphical recorder-multimeter

Class A power analyser – Compliant with IEC 61000-4-30 – Multiple communication modes

400 A AC/DC RMS clamp multimeter with autoranging.

Four instruments in one - Earth resistance - Soil resisitivity - Continuity and earth coupling

Analogue multimeter with 200 A AC current clamp

Expert multifunction electrical installation tester compliant with the NF C 15-100, FDC 16-600 & EN 61557 standards.

Type 2 test adapter for EVSE AC BEV/BHEV charging stations