Chauvin Arnoux

1 kV megohmmeter & digital multimeter – Electrical safety checks on installation – 2-colour backlit LCD screen – Immediate Pass/Fail decision: blue/red screen – Insulation at 250/500/1000 V – Voltage 0 to 700 V – Automatic power-off function

1 kV megohmmeter & digital multimeter – Electrical safety checks on installation – 2-colour backlit LCD screen – Immediate Pass/Fail decision: blue/red screen – Insulation at 250/500/1000 V – Voltage 0 to 700 V – Automatic power-off function

LRV7 combination pH electrode

Digital earth and resistivity tester up to 2,000Ω in site case with built-in battery

Flexible current sensor Measurement, range from 100 mA to 10 kA depending on measuring instrument, Clamping diameter 100 mm

AC and DC current clamp

MiniFlex flexible current sensor for QualistarPlus C.A 8436 and PEL106. IP67 connector and 100 mm clamping diameter.

IP67 three-phase power analyser

For measuring alternating currents

Hight AC and DC current clamp

AC current clamp for Qualistar and PEL

A compact, ergonomic clamp for measuring alternating currents

Digital voltage and continuity tester with LCD screen
Automatic AC / DC recognition for voltage
Voltage up to 1,000 V, resistance and capacitance, diode test, automatic power-off

Watertight portable conductivity meter, For checking the quality of water

Compact multifunction electrical installation tester – All the measurements stipulated by the NF C 15-100 & FD C 16-600 standards

1 kV Insulation and Continuity Tester

TRMS leakage current multimeter clamp

Flexible three-phase current sensors
IP67, 1,000 V CAT IV
Measurements from 0.5 A to 3 kA

Specially designed for industrial applications, the CA 1727 tachometer measures the rotation speed of any moving part, remotely or by contact.

Equipped with a 160 x 120 detector and a 38°x28° wide-angle lens, the CA 1954 camera is ideal for all applications in the building, electrical maintenance and mechanical maintenance sectors.

A comprehensive multimeter for electrical maintenance of installations and small AC and DC machines

Digital tester with MiniFlex® flexible current sensor. AC and DC voltage up to 1,000 V. Current up to 300 A via the MiniFlex® sensor included. Automatic selection of measurement type (resistance, audible continuity, capacitance or diode). No-contact detection of live conductors (phase). Large backlit display. Removable test probes.

Class 2 integrating sound level meter – Recording of up to 64,000 measurement points and data processing software supplied as standard – 60-hour battery life – Remote microphone with 5 m extension

1 kV Insulation and Continuity Tester

Electrical installation tester compliant with the NF C 15-100 & IEC 60364-4 standards

Compact 400 A AC TRMS clamp multimeter

Clamps for AC leakage current from 500 µA to 400 A

The MTX 200 Series multimeters which are simple to use for day-to-day work but also offer all the crucial functions of a multimeter: current, voltage and resistance measurements.

Low-voltage two-pole voltage absence testers

Communicating 50-100 V Telecom Insulation and Continuity Tester

Expert multifunction electrical installation tester compliant with the NF C 15-100, FDC 16-600 & EN 61557 standards.

600 A TRMS AC multimeter clamp

For measuring alternating currents

This versatile multimeter is ideal for instrumentation or command signals, as well as those on three-phase networks up to 1000 V

 

This rugged, intuitive digital pH-meter closely matches the requirements in the agri-food industry, education and research.

A comprehensive multimeter with all the functions needed for testing, maintenance and inspections