Chauvin Arnoux

The interface between the sensor and the multimeter

IP2X for greater safety

"Kits" containing a selection of accessories to equip your instrument in one go at a lower cost.

MultiFIX mounting accessory

Leakproof, rigid site cases equipped with foam for stowing, storing and transporting your measuring instruments

Metal cases equipped with foam for stowing, storing and transporting your measuring instruments

Storage and transport accessoires

Used with the multi-purpose "MultiFIX" mounting system, these soft cases and bags will make your life and your measurements much easier.

Protected and stowed, your instruments and accessories will last longer

All the connection accessories required for your oscilloscope in the field

Essential for connecting laboratory instruments

Telephone, IT and video cabling tester.

LAN wiring tester - Mapping, detection, location and identification of faults

Tester for power sockets and 10 mA / 30 mA RCDs.

For renovation work and quick testing of 2P+E power socket connection.

Detector of posts (wood/metal) and live cables.

400 A AC/DC RMS clamp multimeter with autoranging.

600 A AC RMS clamp multimeter with autoranging.

Quenching circuit locator.

Voltage probes for oscilloscopes

Handheld differential probe with wrist-strap, powered by 9V battery, 1 x 30 MHz channel, 600V CAT IV, banana plugs and crocodile clips

Laboratory-type differential probes with mains power supply, 2 x 30 MHz or 50 MHz channels, 600 V CAT II or CAT III, banana plugs or BNC connectors

Flexible current sensor Measurement, range from 100 mA to 10 kA depending on measuring instrument, Clamping diameter 100 mm

Power logger (W, VA, var) and energy meter –TRMS voltage and current – Installation without cutting off the electrical network – Communication: GPRS, Bluetooth, Ethernet, USB – ANDROID – 600 V CAT III

Power logger (W, VA, var) and energy meter –TRMS voltage and current – Analogue channels - Installation without cutting off the electrical network - 3G/GPRS, Bluetooth, Ethernet, Wifi and USB communication – 1,000 V CAT IV

TEMPERATURE PROBE PT1000 BT6

E94 is a current clamp use for measuring alternating or direct currents without any action on the installation

MINI 94 AC clamp /Current range from 50 mA 200 AAC

AmpFlex flexible current sensor for QualistarPlus CA 8436 and PEL106. IP67 connector and 100 mm clamping diameter.

1,000 A TRMS AC multimeter clamp

1,200 A TRMS AC/DC multimeter clamp

Flexible current sensor

IEC 61010 1000 V CAT III and 600 V CAT IV

LRV7 combination pH electrode

1 kV megohmmeter & digital multimeter – Electrical safety checks on installation – 2-colour backlit LCD screen – Immediate Pass/Fail decision: blue/red screen – Insulation at 250/500/1000 V – Voltage 0 to 700 V – Automatic power-off function

2--channel logger thermometer for Pt100 and Pt1000 resistance temperature sensors