Chauvin Arnoux

Portable oscilloscope with 2 isolated channels, 600 V CAT III, 40 MHz bandwidth, 2 GS/s ETS, double 8,000-count multimeter with power measurements, 31-order harmonics with 40 to 450 Hz fund., colour screen, USB.

Tester/meter for measuring the level of low-frequency electric fields, equipped with an external antenna. Simple, economical, compact and IP65, with a backlit 2,000-count LCD screen.

MiniFlex flexible current sensor for QualistarPlus C.A 8436 and PEL106. IP67 connector and 100 mm clamping diameter.

IP67 three-phase power analyser

20 MHz generator-meter, multiple functions, ideal for higher education, R&D engineers and scientific research.

5 MHz function generator, ideal for education, technical training and R&D, control and production technicians.

1P, 3P and 4P earth kits of different lengths.

Accessories and resistivity add-on for 1P, 3P and 4P earth kits, resistivity.

The LX1600-PC  is a 16-channel logic analysis probe on PC for decoding a large number of data buses: UART, I2C, SPI, CAN, LIN, Modbus, etc.

2-channel data logger

A compact, ergonomic clamp for measuring alternating currents

AC current clamp for Qualistar and PEL

Insulated shunts for training purposes

Hight AC and DC current clamp

For measuring alternating currents

Communicating 60,000-count TRMS benchtop multimeter for a broad range of applications in electronics and electrical engineering (1,000 V Cat. III) .

Flexible three-phase current sensors
IP67, 1,000 V CAT IV
Measurements from 0.5 A to 3 kA

Digital voltage and continuity tester with LCD screen
Automatic AC / DC recognition for voltage
Voltage up to 1,000 V, resistance and capacitance, diode test, automatic power-off

Equipped with a 160 x 120 detector and a 38°x28° wide-angle lens, the CA 1954 camera is ideal for all applications in the building, electrical maintenance and mechanical maintenance sectors.

RMS leakage current multimeter clamp

1 kV Insulation and Continuity Tester

Compact multifunction electrical installation tester – All the measurements stipulated by the NF C 15-100 & FD C 16-600 standards

Watertight portable conductivity meter, For checking the quality of water

A comprehensive multimeter for electrical maintenance of installations and small AC and DC machines

Specially designed for industrial applications, the CA 1727 tachometer measures the rotation speed of any moving part, remotely or by contact.

Clamps for AC leakage current from 500 µA to 400 A

Electrical installation tester compliant with the NF C 15-100 & IEC 60364-4 standards

Digital tester with MiniFlex® flexible current sensor. AC and DC voltage up to 1,000 V. Current up to 300 A via the MiniFlex® sensor included. Automatic selection of measurement type (resistance, audible continuity, capacitance or diode). No-contact detection of live conductors (phase). Large backlit display. Removable test probes.

The MTX 200 Series multimeters which are simple to use for day-to-day work but also offer all the crucial functions of a multimeter: current, voltage and resistance measurements.

Compact 400 A AC TRMS clamp multimeter

1 kV Insulation and Continuity Tester

Class 2 integrating sound level meter – Recording of up to 64,000 measurement points and data processing software supplied as standard – 60-hour battery life – Remote microphone with 5 m extension

600 A TRMS AC multimeter clamp

Expert multifunction electrical installation tester compliant with the NF C 15-100, FDC 16-600 & EN 61557 standards.

For measuring alternating currents

This rugged, intuitive digital pH-meter closely matches the requirements in the agri-food industry, education and research.